Adding of corners in the reflectors

Écrit par Léo et Maxime le . Publié dans How to improve the performances of the "BISS" model ?

How to collect more sunbeams ?

Reflectors shape

Thus reflectors could be much more impressive than they are. However the oven would become fast unstable and cumbersome.

However, all the beams which come to strike the usual reflectors, are not reflected towards the window as we were able to notice with a laser. All the cornersplaces surfaces, refelected the beams towards another reflector, reaching the window with a not convenient incident angle. Some of them, are reflected towards the atmosphere.

Experience and hypothesis n°15: Reflectors with "broken corners" should allow to reach a more important temperature because they would allow to reflect more beams towards the oven.

Protocol : To test this hypothesis, we decided to put simply corners in the existing reflectors, before buiding more sophisticated reflectors. We installed two ovens with the same reflectors and in the same conditions at first to be sure that they reached the same average temperature, then we added corners.

Results: When that we installed settled both ovens in the same conditions, we were able to notice that the reached 145 °C maximal temperature ( 21°C outside temperature). With corners in one of the ovens, we observed that its maximal temperature reached 151.5 °C. So, the temperature difference increased from 124 °C to 130,5 °C, that is to say a 5 % increase.

Conclusion: corners arranged in reflectors allowed to reflect more sunbeams in the oven and so to get back more energy.